Driver and Software Updates

Please do not download and/or attempt to install drivers from this area unless you have been specifically instructed to do so by CS WinOMS Support or are an experienced hardware technician servicing a practice using CS WinOMS. If you have any questions or are unsure of how to continue, please stop immediately and contact CS WinOMS support at 1-800-275-4637 for assistance.

The XP Service Pack 2 Utility utility should be run on any computer running Windows XP Service Pack 2 and CS WinOMS CS v6.0 or higher.

To run the utility follow these steps:

When you begin to download a file, you may be asked by the computer what to do with the file. Always opt to save the file to a temporary directory on your hard drive.If you will be using this utility on a computer other than the one you're using to download the files, please be sure to copy the downloaded file to a temporary directory on the computer that requires the new utility.Verify that all programs on the computer are closed, and from the START button, choose RUN and type the path to the SP2UTIL.EXE file you just downloaded (i.e. the temporary directory on your computer).The utility will perform a series of diagnostic steps and automatically make any corrective actions needed to allow your imaging software to operate under Windows XP Service Pack 2. A list of the corrective actions will be displayed on the screen for your review.When the utility has finished, it will display the following message: "Windows XP Service Pack 2 Utility completed." Click the OK button to close the dialog.

Please do not download and/or attempt to install drivers from this area unless you have been specifically instructed to do so by OPMS Software Support or are an experienced hardware technician servicing a practice using OPMS software. If you have any questions or are unsure of how to continue, please stop immediately and contact OPMS support at 1-800-749-9116 for assistance.

When you begin to download a file, you may be asked by the computer what to do with the file. Always opt to save the file to a temporary directory on your hard drive.If you will be using the drivers on a computer other than the one you're using to download the files, please be sure to copy the downloaded file(s) to a temporary directory on the computer that requires the new drivers.From the START button (Win 9x/NT/2000/XP), choose RUN and type the path to the file you just downloaded (i.e. the temporary directory on your computer). Follow the instructions on the screen to begin executing the file.The driver files will extract into the temporary directory you have indicated.View the "readme.txt" file which has just been extracted for instructions on completing installation of the drivers.

Please do not download and/or attempt to install drivers from this area unless you have been specifically instructed to do so by ORTHOWARE Software Support or are an experienced hardware technician servicing a practice using ORTHOWARE software. If you have any questions or are unsure of how to continue, please stop immediately and contact ORTHOTRAC support at 1-866-721-4439 for assistance.

When you begin to download a file, you may be asked by the computer what to do with the file. Always opt to save the file to a temporary directory on your hard drive.If you will be using the drivers on a computer other than the one you're using to download the files, please be sure to copy the downloaded file(s) to a temporary directory on the computer that requires the new drivers.From the START button (Win 9x/NT/2000/XP), choose RUN and type the path to the file you just downloaded (i.e. the temporary directory on your computer). Follow the instructions on the screen to begin executing the file.The driver files will extract into the temporary directory you have indicated.View the "readme.txt" file which has just been extracted for instructions on completing installation of the drivers.

TWAIN drivers regulate communication between software applications and imaging devices to acquire images directly into that software.

When you begin to download a file, you may be asked by the computer what to do with the file. Always opt to save the file to a temporary directory on your hard drive.If you will be using the drivers on a computer other than the one you're using to download the files, please be sure to copy the downloaded file(s) to a temporary directory on the computer that requires the new drivers.From the START button (Win 9x/NT/2000/XP), choose RUN and type the path to the file you just downloaded (i.e. the temporary directory on your computer). Follow the instructions on the screen to begin executing the file. The driver files will extract into the temporary directory you have indicated.View the "readme.txt" file which has just been extracted for instructions on completing installation of the drivers.

Downloads Available:

• CS 8000/CS 8000C Drivers
• CS 8100 Driver
• CS 8100SC Driver
• CS 8100 3D Driver
• CS 8100SC 3D Driver
• CS 8200 3D Driver
• CS 9000/CS 9000C Drivers
• CS 9300 Driver
• CS 9300 Select Driver
• CS 1200/CS 1500/CS 1600 Drivers
• RVG 6500/RVG 6200/RVG 6100/RVG 5100 Drivers